Roof Access Hatches
Automatic Fire Vents
Floor & Vault Doors
Safety Products
Floor Access Covers
GenBuilt™ Series
GenGuard™ Series
GenShield™ Series
GenBossed™ Series
GenFrame™ Series
Tough to the Core
Galvannealed Steel
 
 
Type J H20 Steel and Type J-AL H20 Aluminum
 
• With drainage channel frame

• For use in exterior applications where the doors will be subjected to vehicular traffic

• Designed to withstand AASHTO H-20 wheel loading in off-street locations
Type J, JD Steel Drainage Door
 
• With drainage channel frame

• For use in exterior applications where there is concern about water or other liquids entering the access opening
Type J-AL, JD-AL Aluminum Drainage Door
 
• With drainage channel frame

• For use in exterior applications where there is concern about water or other liquids entering the access opening

• Ideal for most corrosive environments

Type Q Steel and Type K Aluminum
 
 
• With angle frame

• Generally for interior use or exterior applications where water or liquid infiltration is not a concern


Interior Doors
• Accept a wide variety of flooring materials, allowing the doors to virtually blend in with the surrounding floor
 
 
 
Type T
• Designed for field-installation of carpet or composition flooring material






Type TER

• Designed for field installation of architectural flooring material of up to 1" (25mm) in thickness


Type JFR
 
Type JFR
• Diamond pattern plate (Steel)
Type FR
 
• Pan-type cover design accepts flooring material for aesthetic fire protection

• 2 hour fire rating accordance with ASTM E119, NFPA 251, NFPA 288, BS476: Part 22 and UL-listed (File R15197)

• Aluminum construction

 
• Type FR accepts flooring material up to 1/2" (13mm) in thickness
• Bilco's UL-Labeled self-closing mechanism is standard on Type FR doors and can be specified on Type JFR doors
Emergency Evacuation
 
• Provides egress from underground rapid transit system platforms and tunnels in emergency situations
Type HLC
 
• Reinforced for extreme loading conditions generated by vehicles such as large aircraft, heavy equipment and fork lift trucks

• Reinforced for 200 psi + 30% impact live load
Type PCM
 
• Incorporates several innovative features which reduce the amount of labor required by precast concrete manufacturers to cast the door into a concrete wall
• Type J-AL single leaf doors can be supplied with provisions for odor control by specifying Type J-AL-R. Doors are designed to contain odors and reduce the air leakage rate in odor emitting environments.

• Tested under a 1" (25.4mm) column of water, the Type J-AL-R door provides an air infiltration rate of less than 1ft.3/min (.028m3/min) per lineal foot (30.5cm) of cover perimeter.